China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC

Product Details
Customization: Available
After-sales Service: Lifelong
Structure: Vertical

360° Virtual Tour

Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
2699
Year of Establishment
2007-06-01
  • China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC
  • China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC
  • China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC
  • China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC
  • China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC
  • China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC
Find Similar Products

Basic Info.

Model NO.
THD-6DT-L
Model
Thd-6dt-L
Transport Package
Plywood Box
Specification
0.49*0.36*0.55
Trademark
TOPSTAR
Origin
Guangdong, China
HS Code
8419399090
Production Capacity
3000 Units Per Year

Product Description

China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC

China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC

1> Drying and Dehumidifying system
2>Feeding and Conveying system
3>Mold temperature control system
4>Auto cooling system
5>Dosing&Mixing system
6>Granulating&Recycling system
 

Introduction

Stainless and polished one-unit design ensures material free from contamination.
It adaots "Hot Air Down-Blowing" and "Cyclonic Air Exhausting" principle to ensure uniform dry efficiency.
All these models areparticularly for optics.

Practical New Patent for Stainless Hopper Dryers.
Patent No: ZL 201120302379.3
 

Features

1. Double-layer stainless steel hopper dryer features with superior temperature keeping to improve energy saving greatly.
2.  The material  inlet lid of hopper is equipped for easy installation of auto loader.
3. Drying under the principle of hot air down-blowing and cuclone air exhausting result in consistent drying effects evenly.
4. Adjustable overheat safety thermostat.
5. Main power isolator externally installed as standard.
6. Hopper barrel is fitted with see-through windows to observe inside material level.
7. Safety device with overheat and overload protection.
8. 24 hours auto start/stop timers as standard.


Options

1. Magnetic Seats
2. Hopper Magnet
3. Hot Air Recyclers
4. Exhaust Air Filters
5. Material suction boxes
6. Floor Stand


Product Structure Diagram

China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC
Specification Sheet

Model THD-6DT-L THD-12DT-L THD-25DT-L THD-50DT-L THD-75DT-L THD-100DT-L THD-150DT-L THD-200DT-L THD-300DT-L THD-400DT-L THD-600DT-L THD-800DT-L THD-1000DT-L THD-1500DT-L THD-2000DT-L THD-2400DT-L
Hopper Capacity KG 6 12 25 50 75 100 150 200 300 400 600 800 1000 1500 2000 2400
Blower Power W 75 75 135 155 210 215 320 320 340 340 1000 1500 1500 2200 2200 3700
Heater Power KW 0.9 1.8 3.0 4.0 6.0 9.0 9.0 12.0 15.0 18.0 21.0 24.0 32.0 48.0 48.0 32.0
Drying Temp ºC 150ºC
Outlet Size inch 1.5 1.5 1.5 2 2 2.5 2.5 2.5 3 3 4 4 5 5 5 6
Inside Hopper M 0.21 0.25 0.287 0.387 0.422 0.457 0.512 0.607 0.67 0.76 0.9 0.9 1 1.2 1.2 1.4
Outside Hopper M 0.253 0.293 0.33 0.43 0.465 0.5 0.595 0.69 0.754 0.844 0.985 0.944 1.05 1.25 1.25 1.5
Flange ID Dia M 0.04 0.04 0.05 0.05 0.065 0.065 0.065 0.0762 0.1 0.1 0.1 0.11 0.11 0.11 0.11 0.1
Flange PCD Dia M 0.09 0.06 0.125*0.125 0.13*0.13 0.13*0.13 0.13*0.13 0.13*0.13 0.15*0.2 0.15*0.2 0.21*0.25 0.2 0.2 0.2 0.2 0.2 0.21*0.25
Flange OD Dia M 0.12 0.12*0.12 0.175*0.175 0.175*0.175 0.175*0.175 0.175*0.175 0.175*0.175 0.175*0.175 0.18*0.245 0.18*0.245 0.25*0.3 0.23 0.23 0.23 0.23 0.25*0.3
Blower PCD Dia M 0.07 0.136 0.163 0.208 0.254 0.270.3
Blower OD Dia M 0.1 0.148 0.18 022 0.27  
Power Supply V 380VAC 3P/PE 50Hz
Control Voltage V 220VAC 1P/PE 50Hz
Total Power KW 1 2.1 3.4 4.4 4.4 6.4 9.5 12.5 15.5 18.5 22.5 25.5 33.8 50.5 50.6 36
Wires Specification mm2 5*1.5 5*2.5 4*4+1*2.5 4*6+1*4 4*10+1*6 3*16+2*10 3*25+2*16 3*16+2*10
Wires Length M 2
Dimensions L(mm) 0.49 0.525 0.605 0.715 0.74 0.8 0.95 1.05 1.14 1.26 1.49 1.86 1.35 1.55 1.55 2.18
W(mm) 0.36 0.36 0.57 0.66 0.67 0.69 0.85 0.9 0.91 0.98 1.1 1.25 1.05 1.25 1.25 1.62
H(mm) 0.55 0..65 0.88 1.09 1.26 1.385 1.55 1.65 1.76 1.86 2.57 2.75 2.5 2.8 3.3 4.11
Weight KG 30 30 47 63 65 95 130 155 186 225 280 320 380 500 580 650
Flange ID2 M 0.04 0.04 0.05 0.05 0.05 0.063 0.063 0.076 0.1 0.1 0.101 0.101 0.101 0.010 0.010 0.010
Flange L1 M 0.09*0.09 0.09*0.09 0.13*0.13 0.13*0.13 0.13*0.13 0.13*0.13 0.13*0.13 0.12*0.141 0.12*0.141 0.12*0.141 0.21*0.21 0.21*0.21 0.21*0.21 0.21*0.21 0.21*0.21 0.21*0.21
Flange L2 M 0.12*0.12 0.12*0.12 0.175*0.175 0.175*0.175 0.175*0.175 0.175*0.175 0.175*0.175 0.175*0.175 0.18*0.18 0.18*0.18 0.25*0.25 0.25*0.25 0.25*0.25 0.25*0.25 0.25*0.25 0.25*0.25
Optional Accessories 1. Magnetic Seat                      2. Hopper Magnet                      3. Hot Air Recycle                            4. Exhaust Air Filter 
5. L Type Floor Stands             6. A Type Floor Stands               7. Material Suction Box

Note: We reserve right to change specifications without prior notice.

China Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PCChina Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PCChina Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PCChina Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PCChina Manufacturer Plastic Hot Air Dryer Hopper for ABS/PP/PE/PC

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier