Economical Swing-Arm Robot for Horizontal Injection Machine

Product Description

L-650[V] Single Axis AC Servo Injection Robot Manipulator

Advantages: High efficiency, High Precision, Reduce Cost, High Safety.

Injection mold clamping force range:80~150ton
Swing-Arm Robots are extensively applied to horizontal/vertical plastic injection machines ranging from 50T~250T which can rapidly take out the runners, runner, and finished products from the mold of plastic injection molding machines, and place runners or runners into beside-the-press granulator for recycling immediately.  There are two types of arms-single stage and telescopic.  The vertical stroke for the single-stage is 550mm and for the telescopic is 650mm.  This series is equipped with a wrist rotation mechanism and gripper sensor that can rotate products at 90°.

Structural Units
Employed high strength & tension aluminum alloy to work with precise linear guideway, features lightweight, wear resistance, and long service life.

Wrist Rotation Mechanism 90°
The arm front section for installing the gripper can rotate 90°; absorbs & gripper jig can be installed with a sensor device for detecting to get products or not.

Function Features
X-axis can rotate 90° which is for changing molds conveniently, equipped with a hydraulic shock absorber for making forward & backward strokes more stable and smooth. 
Y-axis is equipped with a device to avoid pneumatic cylinder falling;
Z-axis can be adjusted angle from 45°~90° for placing finished parts in a different directions according to requirement  ( to place parts at the operated side or non-operated side of injection molding machines).

Safety Protection
External signal interlock with injection molding machine to have double safety protection for molds to ensure no locking molds if parts are not taken out via the signal confirmation of finished product removal.

Control System
Palm controller, friendly operation interface, easy operation.

Model Features
X-650 is mainly used for removal of the runner or finished products independently; also can be used for removal of runner and finished products from 2 plate molds simultaneously.
X-650PR are mainly used for removal of runner & runner and finished products from 3 plate mold simultaneously and any arm can be used independently to remove finished parts or runner.
L-550 are extensively applied to vertical injection molding machines and can be used for removal of runner, with the full auto operation.
Swing Arm Robot for Vertical Type IMM.
 

Model	L-550	L-650
Type	Single-stage	Single-stage
I.M.M. Range(TON)	12-150	80-150
Vertical Stroke(mm)	550	650
Side-entry Stroke(mm)	75	75
Swing Angle(ºC)	50-90	60-90
Gripper Rotation Angle(ºC)	180	180
Max. Load(with tool)(kg)	2	2
Min. Take Time(Sec.)	0.8	0.9
Dry Cycle Time(Sec.)	4.2	4.4
Drive System	Pressure
Working Air Pressure	5-7(kg/cm2)	5-7(kg/cm2)
Air Consumption(L/cycle)	7.6	7.7
Power Consumption(KVC)	0.2A	0.2A
Power	AC220V50/60HZ
Weight(kg)	38	39

 

Model	A	B	C	D	E	F	G	H	I	J	K	L	M	N
L-550	1230	485	340	550	20	140	170	35	410	200	540	320	255	160
L-650	1330	485	340	650	20	140	170	35	410	200	540	320	255	160

Please note that the price of this item is EXW price (excluding freight and customs clearance fees).