Topstar 90-470Ton Horizontal Injection Molding Machine for Households Plastic Products
Product Description:
The TM II series injection molding machine has the ability to mold dense plastic products with complex appearance, precise dimensions or metal inserts in one go. It's widely used in electronics, packaging, 3C, auto parts and FMCG industries, etc.
Product Features:
1. Strong engine, efficiency increase.
2. Configuration promoted, stable to use.
3. Optimized design, energy saving and reliable.
4. Highly integrated, accurate and efficient.
Accessory Introduction:
1. Standard KEBA controller, PHASE motor, DELTA drive, with self-developed control program, more precise production control.
2. Standard configuration of plating screw and temperature control of the offload, higher production efficiency, and wider application range of rubber materials.
3. Optimized clamping design, higher strength and more stable.
4. Diagonal double carriage cylinders and linear guide, more accurate and stable injection.
5. Pre-plasticizing adopts proportional back pressure control, easy to operate. Multi-stage back pressure setting can be realized, with higher precision and improved plasticization quality.
6. Precision PVD alloy screw head set, adapt to a wider range of plasticizing requirements.
Parameter Table:
| INJECTION UNIT |
UNITS |
TM90II |
| Screw Diamete |
mm |
32 |
36 |
40 |
| Screw L/D Ratio |
L/D |
22.5 |
20.0 |
18.0 |
| Screw Stroke |
mm |
150 |
150 |
150 |
| Shot Volume |
cm3 |
121 |
153 |
188 |
| Shot Weight(ps) |
g |
110 |
139 |
172 |
| oz |
3.9 |
4.9 |
6.0 |
| Injection Pressure |
kgf/cm3 |
2393 |
1890 |
1531 |
| Injection Rate |
cm3/s |
96 |
122 |
151 |
| Injection Rate |
mm/s |
120 |
120 |
120 |
| Screw Speed |
rpm |
260 |
| Nozzle Contact Force |
t |
4.2 |
| Nozzle Stroke |
mm |
260 |
| CLAMPING UNIT |
UNITS |
TM90II |
| Clamping Force |
t |
90 |
| Opening Stroke |
mm |
330 |
| Platen size(H×V) |
mm |
530*530 |
| Space Between Tie Bars(H×V) |
mm |
360*360 |
| Mlould Thickness (Min) |
mm |
125 |
| Mlould Thickness (Max) |
mm |
400 |
| Max. Daylight |
mm |
730 |
| Ejector Force |
t |
4.2 |
| Ejector Stroke |
mm |
120 |
| Locating Ring |
mm |
100 |
| POWER/HEATING UNIT |
UNITS |
TM90II |
| System Pressure |
kgf/cm3 |
175 |
| Pump Power |
kw |
13 |
| Heating Power |
kw |
7 |
| Number of Temp Control Zones |
- |
3+1 |
| OTHERS |
UNITS |
TM90II |
| Machine Dimensions(LxWxH) |
m |
4.65*1.23*1.88 |
| Oil Tank Capacity |
L |
150 |
| Machine Weight |
t |
3.3 |
| Platen Dimensions |
|
| Platen Dimensions |
|
Note: Due to the continuous development of technology, improvement and update of design, the above specifications are subject to change without prior notice.
){kind=link}